CA Cleaning Products Right to Know Act

4
Installation
1
Stretch the lower arms
2
Securing the rod and top
cover
□ Separate the lower arms (D) to ensure there is an
equal space between them.
□ Make sure the electrical wires are safe and
through the rod (C) and throuht the top cover
(B).
□ Screw the rod (C) into bushing (G).
3
Attaching the mounting strap to the outlet box
□ Screw the nipple (GG) about 1/2 in. into
the screw collar loop (II).
□ Screw the other side of the nipple (GG)
about 3/8 in. into the mounting strap (CC).
□ Tighten the hex nut (FF) against the mounting strap (CC)
to secure the nipple (GG).
□ Attach the mounting strap (CC) to the outlet box (not included)
using the outlet box screws (EE)