Instructions / Assembly

5
Installation

Determining Mounting Method
WARNING:
personal injury, mount to outlet box marked acceptable for
fan support of 15.9 Kg (35 lbs.) or less and use mounting
screws provided with the outlet box.
Ƒ If there is not an existing UL-listed metal mounting box,
read the following instructions. Disconnect the power
by removing fuses or turning off circuit breakers.
Ƒ Secure the outlet box directly to the building structure. Use
appropriate fasteners and building materials. The outlet
box and its support must be able to fully support the moving
weight of the fan (at least 35 lbs.). Do not use plastic outlet
boxes. Figures 1 and 2 are examples of different ways to
mount the outlet box.
Ƒ
ceiling joist, you may need an installation hanger bar as
shown in Figure 3 (available at your retailer).
Figure 1
Figure 2
Figure 3
Outer Box
Outer Box
Outer Box
INT_UE42V-SHB_INT195-YJ 19年2月14日 15:33
Installing the Support Bar
REMEMBER to turn off the power. Follow the steps below to hang
your fan properly.
Secure the supporting bar to the ceiling outlet box as
Match the three holes at two ends of the supporting bar (A)
with three screws of the hanger. (Figure 5)
shown in Figure 4 by using two screws and washers (not
provided). Make sure the supporting bar is level. You may
need to insert additional washers (not provided) between
the outlet box and the supporting bar to make it level.
Figure 4
Outer Box
Before making the electrical connections, use the square
hole at one end of the supporting bar (A) to hang the fan
motor (Figure 6).
Figure 6
Figure 5
A
A
1
2