User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 5 of 54 07.20.07
The only way for a registered device to be updated from a different workstation
than the one on which it was registered is for the device to be reset (see Section
III, 9.c.). Resetting device erases all stored fingerprint templates, restores its
factory default settings, and enables a device to be registered to a new user.
Resetting the device does not reset the Administrator PIN (assuming it was
changed from the default PIN at the time of device registration).
7. plusID Manager Installation
The CD containing the plusID Manager software will run automatically when
inserted in the CD-ROM drive, provided auto run is enabled, and will display the
plusID Manager Setup Wizard (Figure 2). If the installation program does not run
automatically, navigate to the CD-ROM drive and double click setup.exe.
Figure 2
Installation Setup Wizard
Figure 1
Security Advisory