User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 48 of 54 07.20.07
Appendix D
plusID Button Operation
The plusID has four function buttons on the face of the device that during enrollment can be
programmed with physical access credentials (card formats) for various doors and facilities.
Power On
Press any button that is programmed with an access credential. All four lights will appear
for an instant and then blink green to request a verification (fingerprint swipe). If a solid
red light appears instead of a blinking green light, the button does not have an
associated access credential.
Restart
With the device powered on, pressing any other button with an access credential will
restart the device.
Power Off
Press the same button used to turn on the device, or any button without an access
credential. All four lights will blink four times as the device powers off. The device will
turn off automatically after a pre-determined number of seconds (as configured under
“Default Device Settings” in the plusID Manager).