User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 35 of 54 07.20.07
! A firmware upgrade does not erase or reset the device and has no
impact on any of the information that is stored on the device (i.e.,
device settings, fingerprint templates, Administrator PIN, credentials,
etc.)
If in receipt of updated firmware, with a device connected to the
plusID Manager computer:
1. Download and save the firmware file onto the computer which has
the plusID Manager installed. When saving, do not change the
name or file extension of the file.
2. Click on the “Browse” button to the right of the “New Firmware
Image File” field.
3. Browse to and select the saved firmware file.
4. With the path and file name for the firmware file is inserted, click
the “Update” button.
5. The new firmware will be downloaded onto the connected device.
During the download, the device’s lights will cycle green, red,
yellow and blue.
6. When the upgrade is complete a confirmation message will
appear.
! Do not unplug the device from the computer until the cycling lights
stop and a device upgrade confirmation message is received.
c. Device Reset
The third tab of the “Settings” screen, “Device Reset,” (Figure 11) enables all or
portions of the information stored on the device to be erased and reset. The
options on the Device Reset screen apply only to the plusID device that is
presently connected to the plusID Manager software.
Check the boxes next to the appropriate reset option(s) and then select the “Apply
Reset” button to implement the changes. All four lights on the device will flash
concurrently while the device reboots to implement the changes.