User's Manual

Privaris plusID Manager Operators Manual V1.0

Page 31 of 54 07.20.07

9. Settings

The “Settings” screen includes three tabs across the top for access to Device

Settings, Device Utilities, and Reset Options.

a. Device Settings

The first tab of the “Settings” screen, “Device Settings,” (Figure 9) lists the

settings that will be applied to the plusID device connected to the plusID

Manager software. Unless changed, these settings will be the same as the

“Default Device Settings.” Changing these settings override the Default Device

Settings only for the device that is connected.

Note: The default settings for all enrolled devices can be changed at any

time for by selecting the “Default Device Settings” option under “plusID

Manager” from the main menu tree.

To change the settings for an individual plusID device, select “Settings” from the

main menu tree, select the new settings, then select “Apply Changes” for the

settings to take effect.

The “Get Defaults” button resets the settings to their original values (per the

“Default Device Settings” values). To reinstate the default setting values on the

device, select “Get Defaults” then select “Apply Changes.”

The “Refresh” button cancels changes made prior to the “Apply Changes” being

selected.

Following are descriptions of the individual setting options.

Figure 9

Device Settin

s Screen