User's Manual
Privaris plusID Manager Operators Manual V1.0
Page 29 of 54 07.20.07
d. Loading a Card Format from the Device Tab
Card formats moved from the device to the recycling bin are retained and
can be viewed under the Device tab. A card format that shows an
“unassigned” status is still on the device and may be reassigned to any
available button.
1. Select the Device tab under Credentials Source.
2. Select Detail view using the icon under and to the left of the recycling
bin.
3. Choose a card format with an “unassigned” status
4. “Drag and drop” it to one of the white rectangles above associated
with each of the four device buttons. A progress bar is displayed as
the credential is generated.
5. When credential generation is complete the card format will be shown
in the selected location.
e. Loading a Card Format from the File Tab
This function is not implemented.
f. Removing a Card Format
To remove a card format, or physical access credential, from a plusID device,
“drag” it from one of the white rectangles associated with the device’s four
buttons and “drop” it into the waste basket / recycle bin located in the middle,
right portion of the screen. Removed credentials become “unassigned,” and are
visible from the “Devices” tab. To re-assign the credential, simply drag and drop
it to the desired button above.
g. Demonstrating Physical Access Functionality
The plusID Manager software enables you to load demonstration card formats
onto a plusID device to demonstrate interaction with a door reader and simulate
physical access.
The demonstration card formats can be added to your existing physical access
control system (PACS), or used with a battery powered HID demonstration
reader included the plusID evaluation kit from Privaris.
In normal use, card formats are loaded from an idBank (see page 7), which is a
special smart card that can be purchased from Privaris or an authorized partner,
such as HID. The smart card contains card formats that are securely transferred
to plusID devices using the plusID Manager.
To load demonstration card formats onto a plusID:
1. select “Credentials” from the main menu of the plusID Managers
2. select the “Demo” tab from the middle of the Credentials screen
3. the available card formats will appear at the bottom of the screen