User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 28 of 54 07.20.07
When credential generation is complete the card format will be shown in the
selected location (Figure 8). Different card formats can be loaded for each of the
device’s four buttons for access to multiple doors and facilities. For user
convenience, the same card format can be loaded onto multiple buttons, if
desired.
! If the device is enrolled, but not being used for computer logon, or if a User PIN is
not required for logon, device issuance is complete. Disconnect the plusID device
from the computer and hand it to the user with their USB cable, and plusID Quick
Start Guide that was enclosed in their device box.
c. Loading a Card Format from the Database Tab
All card formats loaded by the plusID Manager are retained in the database.
A card format may be reloaded from the database onto the same
device.
1. Select the Database tab under Credentials Source.
2. Select Detail view using the icon under and to the left of the recycling
bin.
3. Choose a card format associated with the device serial number as
shown in the center column of the list.
4. “Drag and drop” it to one of the white rectangles above associated
with each of the four device buttons. A progress bar is displayed as
the credential is generated.
5. When credential generation is complete the card format will be shown
in the selected location.
Figure 8
Credential Loadin
g
Screen