User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 23 of 54 07.20.07
Continuous
Solid Green
A successful enrollment
Brief Solid
Red, then
Blinking
Green
The sensor did not get sufficient information
from the fingerprint to process the swipe. This
often happens if the sensor is touched before
a swipe is begun, as opposed to placing the
finger and swiping in one continuous motion.
Continuous
Solid Red
Enrollment failed. See “Troubleshooting”
(Appendix A, or under “Help” in the menu
tree). Modify the user's swiping technique
accordingly, erase and re-enroll the finger.
5. Upon a successful enrollment the on-screen prompt, will read “Enrollment
Success,” and a rectangular fingerprint image will appear atop the enrolled
finger on the hand diagram.
! If enrollment fails, see Section 5.h.
e. Enroll the Second Thumb
Repeat the instructions from 5.c. and 5.d., with the user's secondary
thumb.
f. Completing Device Issuance
With two thumbs enrolled, enrollment is complete.
To complete the plusID device issuance process, the necessary access
credential(s) need to be assigned to the device to ready it for physical and/or
logical (IT) access. See Section 7 (“Credentials: Using the plusID for Door
Access”) to assign physical access credentials for door entry, and Section 8.
(“Credentials: Using the plusID for Windows Logon”) to assign logical access
credentials for computer logon.