User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 18 of 54 07.20.07
Manufacturing Information
Manufacturing Information lists the device’s model number, serial number, and date
of manufacture. This information is typically only needed for customer service
inquiries.
Revision Information
Revision Information lists the version information of the hardware and software
specific to each device.
Device Properties
Device Properties lists the plusID device’s unique MAC address, which refers to a
communication channel(s) within the device. This address will only display if
required for the operation of the device.
Refresh Status Button
If there has been a change to any of the device specific status information, pressing
the Refresh Status button will update the information in real time.
5. Enrollment
Enrollment is the key element of the plusID device issuance process. It is what
makes the device work for its enrolled owner and no one else. A precise enrollment
is critical for the plusID device to operate properly.
During enrollment the user’s fingerprint images are captured, encoded and securely
stored as a template on the plusID device. Enrollment readies the plusID for regular
day-to-day use, which is called verification. Verification is simply a fingerprint swipe
in which the device compares the live fingerprint presented to it with the fingerprint
templates stored during enrollment to ensure that only the authorized user can
operate the device.
a. Enrollment Administrator Guidelines
1. Always review the “How to Swipe” instructions with each user before
beginning enrollment.
2. Always enroll both thumbs to ensure that there is a backup in case of
injury.
3. Always enroll the users’ primary thumb first.
4. In the event a thumb is not an option, default to the user’s index finger(s).
5. More than two thumbs/fingers can be enrolled in a single device, but is
likely to result in slower verifications.
6. Remember that as an Enrollment Authority you can erase and re-enroll a
user’s fingerprint at any time.