User's Manual

Privaris plusID Manager Operators Manual V1.0
Page 16 of 54 07.20.07
The Administrator PIN is requested only once per plusID Manager session, per
device. It will not be requested again during the same session, but will be required
each time a new device is connected.
In the case of a device that has been reset, the Device Registration screen will be
presented just as with a new unregistered device. Though the reset device will still
have the same Administrator PIN assigned during its initial registration, not the
default PIN. The Administrator PIN is not reset when the device is reset.
a. Incorrect PIN Entry
If the incorrect Administrator PIN or User PIN is entered an Incorrect PIN
message is displayed (Figure 5).
To prevent malicious attempts to access plusID devices, only nine incorrect tries
are permitted. If the correct PIN is not entered on the tenth try, the device will be
inaccessible. The number of retries remaining is shown in the Incorrect PIN
message box. In the case of the User PIN the Administrator can reset the PIN to
the factory default setting (see below).
! If the Administrator PIN is entered incorrectly ten times, the connected device
will be permanently inaccessible to the Administrator.
b. Issuing More than One Device per User
If issuing an additional or a replacement device to a user, the user information
may be retrieved from the database to ensure the accuracy of data entry. Click
the “Search for existing users” button on the “Device Registration” screen and
select the user from the list of users in the database. All of the same user
information will be associated with the new device in the plusID Manager
database.
Figure 4
A
dmin PIN Entr
y
Figure 5
Incorrect PIN Messa
g
e