User's Manual

Privaris plusID Manager Operators Manual V1.0

Page 9 of 54 07.20.07

About

The “About” screen lists the version number of the plusID Manager software

application.

2. Default Device Settings

The “Default Device Settings” screen (Figure 2) contains the settings that will be

applied to all plusID devices enrolled with the plusID Manager software. These

settings can be changed at any time, but changes will apply only to devices enrolled,

re-enrolled, or re-configured, after the Default Device Settings have been modified.

Note: These default settings can be changed for individual plusID devices at any

time by selecting the “Settings” option under “Devices” from the main menu tree.

Changes made on the “Settings” screen override the default device settings only for

the individual plusID device that is connected at that time.

To configure the default settings, select “Default Device Settings” from the main

menu tree.

Select “Apply Changes” after modifying any of the settings on this screen for the

settings to take effect.

The “Refresh” button resets the settings to their default values.

Following are descriptions of the individual setting options.

Figure 2

Default Device Settin