User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
60
60
Figure 7. 16 Backup Settings Interface
2. Configure the following settings.
 Auto Backup: Check the checkbox to enable automatic backup when connecting a backup device according to the
defined settings.
 Over Type: No Over, By Time and By Time & Lock Alarm are selectable. No Over means the backup will stop when
the backup device becomes full. By Time means the earliest data will be overwritten for circular backup when the
backup device is full. By Time & Lock Alarm means the alarm data will never be overwritten in circular backup mode.
 Camera: Select a channel to configure the automatic backup parameters for it.
 Video Type: Choose the type of the record files for backup.
 Days: The value can be specified from 0 to 255. 0 means the automatic backup of the channel is disabled. 1 means
only the record files of the current day will be backed up. 255 means the record files of the past 254 days till now
will be backed up, and so on.
 Time Segment 1/2: If 0 is set for both Time Segment 1 and Time Segment 2, it means all-day backup. If you set the
time segment, then record files of the defined time duration will be backed up.
 Copy to: You can copy the settings to other channels as desired.
3. After configuration, click the OK button to finish the setting for the automatic backup.
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]