User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
59
59
• Transparent Channel: Connect a serial device directly to the device. The serial device will be controlled
remotely by the PC through the network and the protocol of the serial device.
The RS-485 port can be used for transparent channel only.
Steps:
1. Enter the Serial Port Settings interface to configure the parameters, as shown in Figure 7.13.
Menu>Basic Settings>SerialPort
Figure 7. 15 Serial Port Settings Interface
2. Select serial port type and configure the parameters, including baud rate, data bit, stop bit, parity, flow control and
usage.
3. Click the OK button to save the settings and exit.
7.5 Configuring Automatic Backup
Purpose:
You can connect an eSATA device through the eSATA interface on the front panel to back up the data of the DVR.
Steps:
1. Enter the Backup Settings interface.
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]