User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
54
54
Figure 7. 8 Tamper-Proof Settings Interface
2. Check the Tamper-proof checkbox, and click the Area Settings button for Tamper-proof to set the areas for
detecting video tampering.
Steps:
1) Press the Edit key on the remote control and a red block appears on the screen.
2) Press the Direction key on the remote control to adjust the position of the red block.
3) Press the Enter key on the remote control to save the position of the red block.
4) Press the Direction key on the remote control to adjust the size of the block and press Enter key to save the
setting.
Note: You can press the A button on the remote control to clear the area.
5) Press the Menu key on the remote control to set sensitivity, including Low, Medium and High. Click the OK
button to save and exit.
6) Press the ESC key on the remote control to exit.
3. Click the Handle button for Tamper-proof to set arming schedule and alarm response action(s), as shown in
Figure 7.9.
Alarm response actions:
• Pop-up Image on Monitor:
When an alarm is triggered, the local monitor displays in full screen the video image from the alarming
channel configured for full screen monitoring.
• Audio Warning:
Trigger an audible beep when an alarm is detected.
• Trigger Alarm Output:
Trigger an alarm output when an alarm is triggered. Please refer to Chapter 7.2.2 for alarm output
settings.
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]