User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
53
53
Figure 7. 6 Alarm Output Settings Interface
2. Select an alarm output and set alarm name and duration.
Note: Two relay alarm output are available which are A1 & B1, A2 & B2. If Manually Stop is selected in the
dropdown list of Duration, you can clear it only through Client Software System.
3. Click the Set button to configure the arming schedule for alarm output, as shown in Figure 7.7. Max. 8 time
periods can be set within each day. You can click Copy to copy the settings to other days.
Figure 7. 7 Arming Schedule Settings Interface
4. Click Apply and OK button to save and exit.
7.2.3 Detecting Video Tampering
Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
1. Enter the Camera Settings interface, and click the Set button for More Setting, as shown in Figure 7.8.
Menu>Other Settings>Camera>Set
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]