User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
52
52
Figure 7. 4 Arming Schedule Interface
5. Check the checkbox for Handle Type and click the Set button for Handle Type to configure alarm response
actions, including Pop-up Image on Monitor, Audio Warning and Trigger Alarm Output, as shown in Figure 7.5.
Figure 7. 5 Handle Type Interface
6. Click the Apply and OK button to save the settings and exit.
7.2.2 Configuring Alarm Output
Purpose:
Arming schedule, duration, alarm name can be configured for alarm output.
Steps:
1. Enter the Alarm Output Settings Interface, as shown in Figure 7.6.
Menu>Other Settings>AlarmOut
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]