User manual
User Manual of DS-8100HMFI-TH Series Mobile DVR
50
50
7.1 Configuring Network Settings
Purpose:
Network settings must be properly configured before you operate the Mobile DVR over network.
Steps:
1. Enter the Network Settings interface, as shown in Figure 7.1.
Menu>Basic Settings>Network
Figure 7. 1 Network Settings Interface
2. Configure the following settings, including IP Address, Subnet Mask, Default Gateway, DNS Server and
Download Server IP. Download Server IP should be set when uploading record files to the designate server.
3. Click the Set button for NTP to configure the NTP server, as shown in Figure 7.2.
Figure 7. 2 NTP Settings Interface
4. Check the NTP checkbox to enable the feature. Set the time interval between the two synchronizing actions with
NTP server in Synchronization Interval and set the IP address of NTP Server. Click OK button to save and exit.
5. Click the OK button to save the settings and exit.
Lo-Call 1890 866 900
www.cctvireland.ie
shop@cctvireland.ie