User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
46
46
2. Select Auto Working in Auto Work Type.
3. Choose the day you want to set schedule for automatically starting up and shutting down.
Note: Two periods can be configured for each day. And the time periods can’t be overlapped each other. If
the schedule can also be set to other days, click Copy.
6.2 Configuring GPS
Purpose:
GPS is mainly used for positioning and speed limit alarm.
Steps:
1. Enter the GPS Settings interface, as shown in Figure 6.3.
Menu>Basic Settings>GPS
Figure 6. 3 GPS Settings Interface
2. You can select GPS Module, check Start GPS Time Adjusting and choose Time Zone and GPS Speed.
There are four options in GPS Module, including RS232, RS485, Built-in and Display Terminal.
• RS232: Obtain data from the GPS module connected through RS232 interface.
• RS485: Obtain data from the GPS module connected through RS485 interface.
• Built-in: Obtain data from the GPS module built in Mobile DVR.
• Display Terminal: Obtain data from the intelligent display terminal.
3. Input the Speed Limit and set actions to handle speeding. Audio Alarm and Trigger Alarm Output are
available. Please see Chapter 7.2.2 for alarm output configuration.
4. You can check the checkbox for Channel to display the GPS information on the corresponding channel(s).
5. Click the OK button to save the settings and exit.
Note: You can check the status of GPS in GPS Status interface (Menu>Status>GPS). The channel number varies
according to the different devices.
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]