User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
38
38
4.1 Configuring 3G
Purpose:
Set the parameters for 3G before using it.
Steps:
1. Enter the Dial Settings interface, as shown in Figure 4.1.
Menu>Basic Settings>Dial
Figure 4. 1 Dial Settings Interface
2. Check the checkbox for Enable Dialing.
3. If you want to connect to 3G VPDN private network, please click the Set for More Settings to configure private
network parameters, as shown in Figure 4.2.
Note: Please contact the network operator for private network parameters; PIN management is reserved.
Figure 4. 2 Private Network Settings Interface
4. After configuration, you can check the dial status in the Dial Status interface (Menu>Status>Dial).
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]