User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
26
26
Figure 2. 4 DST Settings Interface
4. Click the Set button for Advance Setting to enter the advanced display settings interface, as shown in Figure 2.5.
Figure 2. 5 Advanced Display Settings Interface
5. Configure the following settings:
• Device Name: Edit the name of device.
• Device No: Edit the serial number of device. The Device No. can be set in the range of 1~255, and the
default No. is 255.
• Brightness of CVBS: Adjust the video output brightness.
• Menu Transparency: Adjust the transparency of the menu.
• Operation Timeout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes,
then the system will exit from the current operation menu to live view screen after 5 minutes of menu
inactivity.
Note: It is not recommended to modify the Device No. You need to enter the Device No on the remote control every
time you use it if you modify the Device No.
6. Click the Apply button to save the settings.
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]