User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
17
17
connection is correct, and then follow the procedure below:
Steps:
1. Connect the “DC IN +” of DVR to the positive pole of vehicle batteries;
2. Connect the “DC IN -” and “KEY -” to the negative pole of vehicle batteries;
3. Connect the “KEY +” of DVR to the vehicle ignition switch;
4. Lock the hard disk;
Note: The hard disk lock is locked when keyhole is upward and open when keyhole is leftward.
5. When switching on the vehicle, the DVR starts up with the vehicle.
Negative pole ignition switch
Figure 1. 5 Negative Pole Ignition Switch
Ignition switch is connected to the negative pole of DC+12/24V of vehicle batteries. Please make sure that the
connection is correct, and then follow the procedure below:
Steps:
1. Connect the “DC IN +” and “KEY +” of DVR to the positive pole of vehicle batteries;
2. Connect the “DC IN -” to the negative pole of vehicle batteries;
3. Connect the “KEY -” of DVR to the vehicle ignition switch;
4. Lock the hard disk;
Note: The hard disk lock is locked when keyhole is upward and open when keyhole is leftward.
5. When switching on the vehicle, the DVR starts up with the vehicle.
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]