User manual

User Manual of DS-8100HMFI-TH Series Mobile DVR
12
12
3
SD/SIM
SD/SDHC card interface (reserved); SIM card interface.
4
LAN
Network interface.
5
IR Control receiver
Receiver for IR remote.
6
POWER indicator
Red means the device is standby, green means the DVR starts up normally.
7
READY indicator
Green means the device is in normal working status and can be controlled by
remote control.
8
HDD indicator
Blinking red when data is being read from or written to HDD.
9
MODEM indicator
Turning off when there is no 3G signal or dialing is disabled. Green means there is
3G signal available.
10
ALARM indicator
Red means there are alarms.
11
GPS indicator
Turning off when there is no GPS module available. Green means there is 3G
module available and blinking green means GPS positioning successfully.
12
CH1~16
One indicator shows the status of two channels. Green means the channel number
marked in the left is in the recording status and red means that the channel number
marked on the right is recording, and the light blinking red and green means both
the two channels are recording. E.g.: Green means channel 1 is recording; Red
means the channel 9 is recording; The mixture color of green and red means the
channel 1 and channel 9 are recording simultaneously.
1.2.2 Rear Panel
Figure 1. 2 Rear Panel
Lo-Call 1890 866 900
www.cctvireland.ie
[e-mail]