Specifications

• The red circle on each camera window that indicates motion sense/trigger has been

replaced with a red alert symbol

• Rate-control (RC) look-ahead has been disabled on the H.264 streaming code in an

effort to reduce latency; you may also set b-frames to 0 on the Webserver

(See 8.)

stream configuration pages for minimum latency. Also a bitrate calculation correction

has been made to these streams to improve quality on low fps cameras.

3.10.17 - October 24, 2012

• Adaptive audio streaming synchronization to avoid lengthy audio delay especially from

wireless IP camera sources--if the signal is disrupted or becomes spotty the software will

work to accurately re-synchronize when the signal is fully restored.

• On the camera properties Audio tab (See 7.2), you may now specifically add audio delay

if necessary. The ability to add video delay (or a negative audio delay) is not currently

supported here.

• Receive buffers adjusted to better accommodate very high bandwidth cameras (3MP,

8Mbps for example)

• For both text and graphic overlays (See 7.1), you may specify required DIO input

bits. The overlay object will only be shown if ANY combination of the specified bits is

present on the DIO input using an AND operation.

• Combined New and Storage status messages into a single log entry to reduce the

number of messages by half

• The clip viewer will now remember the rate setting between sessions

3.10.14 - October 16, 2012

• The global schedule "lock" button now has three states--unlocked, locked, and

temporary. Toggle between locked and temporary by clicking a profile number multiple

times. The temporary setting will allow the schedule to resume normal operation when

the profile is next scheduled to change or after 8 hours, whichever occurs first.

• The individual camera "pause" function now includes a count-down timer. From the

right-click context menu, you may now add time to the Paused state, cancel it, or set it

to "indefinitely."

• Updated Foscam and compatible connection code to insure timely connection

• The Flash webcasting now offers the choice between AAC audio (the default) or the

possibly more stable yet more CPU-intensive MP3

• The first network-reset on an IP camera occurs immediately if the camera connection is

unexpectedly broken

• Help file and Options/Webserver page now link to www.no-ip.com instead of DynDNS as

no-ip offers a free option.