Specifications

You may specify a combination of profiles for which the event will be valid. Use the Schedule

(See 7.8) to automatically set the active profile or use the profile buttons at the top of the Blue

Iris window to set the profile manually.

7.10 Watchdog

This page allows you to configure options to monitor the camera for a loss of signal or to

periodically reset the camera after a specified up-time.

Detect loss of signal

The Timeout period is the number of seconds that must pass without an image received from

the camera before action may be taken.

Select to Attempt reconnect to reset the camera. In the case of a Network IP camera, the

network connection is closed and re-opened to the camera until a specified number of

timeouts have occurred, after which a full camera reset is performed.

You may Trigger alerts after a specified number of timeouts. You may specify which alerts will

be sent during which profiles by selecting the corresponding checkboxes beneath the W