Specifications

Use the Add, Edit and Remove buttons to create a list of daily events such as PTZ presets,

brightness, contrast, and IR light mode (as supported by your camera and Blue Iris).

The Search-back at startup/reset option will cause Blue Iris to search the list from the current

time backward until an event is found for each type of event. For this example image, if the

camera were reset at 10am and profile 1 were active, PTZ preset 1 and brightness 0 off would

be sent.

When you add or edit an event, you may specify a time and a function:

If your time is within 30 minutes of sunrise or sunset (as configured on the Options/Schedule

page), you may specify the time to remain relative to this event. For your convenience the

current sunrise and sunset values are displayed here.