Specifications

• Replaced the '0' PTZ preset button with a '10'

• Changed alert list for iOS app to not include deleted items, which caused them to flash

on/off on the app, and may have led to a crash

• Apple approved the app version 1.01 but iTunes back-end is closed until the 28th, so it

will be released then. 1.02 is planned to be a universal app which will fit much better on

the iPad.

3.13.04 - December 23, 2012

• The Clip list will now at the top show the number of items in the list

• Only Shift may be used to click on PTZ presets 1-10 in order to select 11-20

• For the iOS app, the cameras will be ordered similarly to the web pages where the

camera groups are all at the top

• An FPS calculation error is corrected on the Status/Connections page

• A bug was corrected which caused the playback speed slider to not function correctly

within the clip viewer

• The camera window border is once again red only when actively recording; the grey

circle in the camera title/status bar now only appears when the a file is open for

recording but not actively recording

• Some Foscam FI86xx models internally use preset numbers 30,32,34 etc. and it is

unclear at this time which models those are. In the meantime, if your camera falls into

this category, you can delete the preset numbers from the combo box on the PTZ tab in

camera properties, then re-add the numbers 30, 32, 34, 36, 38, etc.

3.13.03 - December 20, 2012

• Fixes for empty camera and log views in the iOS client; this was caused by camera errors

that contained line feeds

• Fixes for other iOS client errors require version 1.01; waiting for Apple to release it

• Only 1 email/SMS alert now will be sent per camera trigger event; previously they were

sent continuously as the camera remained triggered

• H.264 streaming to the web and iOS client has been limited to 720p resolution; multi-

megapixel camera video tended to overwhelm available bandwidth

3.13.00 - December 15, 2012

• The iOS client app has been approved by Apple and is now available on iTunes!

• The app will require version Blue Iris 3.13 or higher in order to connect. The app version

1.00 has a few minor bugs, but a version 1.01 has already been submitted for approval

by Apple. Version 1.01 also adds a remote control component to allow you to set your

SeaMax DIO outputs as well as play sound files on the server on demand.