Specifications

Using the Sealevel SeaDAC Lite (P/N 8112 and similar), you may send a signal to an external

device when the motion sensor is triggered. The Sealevel 8112 has 4 digital inputs and 4 digital

relay outputs (numbered 0 to 3). In addition to the device and its drivers being installed, you

must also have the SeaMAX.dll in your Blue Iris program folder. To configure this and other

devices, see

Options/Digital I/O (See 11.).

SMS Text Message

The SMS alert allows you to send a text message to a cell phone. The requirement is that your

carrier provides an SMS gateway--that is, an email address to which you may send an email

and have it converted to an SMS message.

Specify the outgoing email server to use as configured on the Options/Email (See 11.) page.

Most large carriers offer this service to their subscribers, but if yours does not, you may try the

Teleflip service or one like it. If your carrier is not listed, you may obtain the gateway address

from them and select "Other gateway" and enter it manually.

Use the Timer to force Blue Iris to wait a specific amount of time between consecutive SMS

messages, even if the camera remains in the triggered state.

The Email alert will contact your outgoing (SMTP) email server directly, and send a message.