Specifications

• A web server connection (no login or other access) is no longer logged unless you also

have the "play sound" enabled on the Options/Webserver page.

• You may request from /admin?profile=x to change the active profile temporarily. Use

x=-1 to lock/unlock.

• You may now specify to receive both images as well as the 10-second MP4 movie with

an email alert.

• You may now attach an image to your SMS alert if your carrier supports MMS. Several

MMS gateway addresses have been added to the presets list. If you find one for your

carrier not on this list please send it to the support email address to be added.

• The Options/Webserver (See 8.) page has been modified so that the IP address fields

resemble those on the mobile app.

• Web server authentication now defaults to Non-LAN only. Previously, this may have

defaulted to No, resulting in users accidentally opening up their servers to anonymous

Internet users.

3.16.00 - January 17, 2013

• You may now specify sunrise/sunset relative times on the PTZ event schedule (See 7.9)

• Alert images are resized to a maximum resolution of 720p for transmission to mobile

clients

• Playback of video with MJPEG compression within a BVR file has been fixed

• The Anonymous web client was not properly logged in some circumstances, and

admin/ptz access may have been affected

• The JpegPull.htm page now sends a keep-alive event

• The JpegPull.htm page now properly displays varying aspect ratio images

• You may now select RTSP as an audio format type on the Video tab in camera properties

if you have separate RTSP streams for video and audio. This is rare, but it was required

to support audio from the IPS network camera. For most RTSP cameras, leave the audio

path blank.

3.15.00 - January 11, 2013

• A new schedule editing UI has been implemented. This is used on Options/Schedule

(See 11.), Camera properties/Schedule (See 7.8) as well as Options/Users (See 11.). This

new control now allows you to edit the schedule by drawing and dragging markers and

profile changes rather than entering times.

• You may set your longitude and latitude on the Options/Schedule page. This allows the

schedule to automatically adjust times based on sunrise and sunset.

• You may specify a timeout value for a temporary profile selection when you use the

profile buttons at the top of the UI. Previously this was hard-coded to 8 hours. If it