Specifications

Profile

Shows the currently active global profile as configured on the

Options/Schedule (See 11.) page. Click one of the numbered

buttons to override the active global profile with any specific

global profile. The first click will temporarily override the

schedule with the selected profile; the schedule will resume

normal operation when the profile is next scheduled to change

or after 8 hours, whichever occurs first. Click the profile number

a second time to lock it.

Inactive

This profile setting (sometimes called profile 0) is the equivalent

of "clear" or "no profile" on the schedule. When set, all

cameras will be inactivated, meaning no recording, alerts or

image posting will occur, although webcasting is

unaffected. The effect of the inactive profile may at first seem

similar to that of the traffic signal icon, although the traffic

signal's actual effect may be configured on the Options page

and will never fully disable (disconnect) cameras as the inactive

profile is capable of doing.

Temp

Profile

When the currently active global profile has been temporarily

overridden, you will see this stop watch. The schedule will

resume normal operation when you click this icon, the profile is

next scheduled to change, or after 8 hours, whichever occurs

first.

Hold

Profile

If you see this red hand icon, the scheduled profile will not

change on its own--you must click this icon in order to resume

the normal operation of the global profile schedule.

5. The Status Bar

The Status Bar