Specifications

Blue Iris Help Copyright © 2012 Perspective Software
157
2.11
• Support for the Sony SNC-DF70N MPEG4 camera
• Enhanced support for audio capture from devices such as the CamGuard USB TV!
Pro. On the camera's Audio tab, select "DirectShow camera."
• When a camera is not enabled for webcasting, it will no longer appear on the list of
cameras in the remote view. In addition, any clips which have been recorded with the
same "short name" as the non-webcasting camera will not appear in the list of clips for
remote viewing.
• On the camera alerts (See 7.5) page, you may now specify a "disarm time" in
seconds. This will delay an alert in order to allow you time to disarm Blue Iris, for
example to prevent an alert following entering your own home.
• The "auto-restore window when motion is detected" feature has been moved to the
Motion sensor page
(See 7.3) for each camera.
• On the startup options page (See 11.), you now have the option to override the default
behavior of not displaying video during remote terminal sessions.
2.10
• Support for the Y-Cam IP camera
• IP camera device options for all Intellinet camera models
• On the Record (See 7.4) tab, you can now include dynamic-date components as part of a
custom-folder for clips. For example, adding %Y%m%d\ to the beginning of the path will
create a new folder for each day.
• It is now possible to create multiple cameras from the same DirectShow input pin or IP
camera in order to "split" a single signal into multiple copies for different processing,
such as different graphic overlays and FTP post websites.
• If you logoff or shutdown before closing Blue Iris, Blue Iris will now properly close files
and connections to avoid corrupt video files.
• A new option on the Post (See 7.7) page to "Preserve Time Order." This option will
always upload the latest image to become camname_000.jpg and rename all others in
the queue so that they are always in newest-to-oldest order. Performance warning: this
option will invoke ringsize-1 number of FTP rename operations after each upload.
• Image files that are overlaid on the video are no longer "locked" for writing and may be
dynamically updated
• Disabled cameras are now excluded from the All Cameras view remotely
• Extremely large clip folders (those containing thousands of clips) are now handled much
more efficiently by the clip list and associated threads.
• After a network camera stops communicating, and then after 2 unsuccessful "network
timeout auto-resets" a full camera-reset will be attempted. Motion detection is now
disabled for 10 seconds following a network auto-reset.