Specifications

156

that the responsiveness of other alert types is not compromised. You may now specify a

scale value for images attached to email alerts.

• New SMS text message alert. This alert uses your outgoing email server to send a

message to your cell phone carrier's SMS gateway address. You may use this alert type

separately or together with email alerts.

2.13

• New cell.htm for mobile devices that supports multiple cameras including the

Index. Also, the image is automatically scaled by Blue Iris (not the browser) to the

device's full browser window width. The Opera browser appears to work well here.

• Support for the Gadspot GS9211 video

• Support for the Gadspot GS9603 video and PTZ

• Support for the BSTI PD100 network camera

• A "full screen" video mode which automatically maximizes the Blue Iris window and sets

the cameras window to occupy the full screen. Right-click on the video window to find

this option. You can right-click again or use the Escape key to return to normal. As

previously, if you want to enter "full screen" video mode for an individual camera, you

can right-click the video window and select "Open in desktop window" and then right-

click that window to Maximize it.

• ASF-stream cameras like the Linksys WVC in MPEG4 mode now use a new reader object

which should be easier on your system resources (virtual memory).

2.12

• The web server (See 8.) has changed to handle varying host addresses (names for your

computer) more compliantly. It is no longer necessary to specify a single server

name. Also, Blue Iris provides a list of all of your LAN IP addresses for reference

purposes, as you may have more than one if you have multiple network cards. You

should use IPCONFIG from the command prompt to view your networking settings.

• New arguments to the /image/cam-short-name method for retrieving images from Blue

Iris for use on mobile devices, etc. Use "s" for scale, "q" for quality, "h" for height and

"w" for width. You need specify only one of scale (in percentage), height, or width.

• New DDE commands. Use topic="camera" and item=the camera's short-name. Send

one of "reset", "enable", or "disable" in the data field.

• Support for the Airlink101 SkyIPCam 250W

• Support for D-Link DCS-2120 RTSP video

• Support for the Av-tech avi201/202 MPEG4 camera using a tunneled RTSP protocol

• Support for the LinkSys WVC200's MJPEG mode and PTZ controls

• Repairs made to Vivotek and NC1600 PTZ controls