Specifications

155

• Support for audio from the DLink DCS-2000, as well as any DLink camera that uses the

Vitamin Decoder version 2.1.

• Support for the Vitamin Decoder 2.1 Auto-Detect Server function which should allow

any new DLink or Vivotek camera based on this technology to operate. You will find a

new IP camera device type "DLink Vitamin Decoder Auto-Detect" for this purpose.

• Support for G.711 audio from the Axis 207w camera

• Fix for DLink PTZ

• Support for the Fitivision 100a camera

• Support for the Zonet ZVC7630 with audio

• Play live audio feed from a camera that's capturing audio. To enable this feature, right-

click on the camera window; additional user interface controls will be added shortly.

2.15

• Support for the GT-NC-160 IP camera

• Support for Y-Cam G.726 audio

• The motion detector now uses the ratio of moving pixels to "unmasked" pixels (instead

of total pixels) when computing a percentage of moving pixels

• The motion detector "overlay motion map" now shows blue where there is motion,

white where there is masked motion, but leaves the video signal otherwise (previously,

this was blacked-out).

• The motion detector edit-mask window now allows the user to draw rectangles rather

than "paint" with a cursor.

• The motion detector edit-mask window is larger, and periodically is updated with a live

image

• Cameras remember their "maximized" status when shown in top-level (desktop)

windows

2.14

• Revised DLink950/G HTTP support with an attempt at audio support

• Inclusion of the previous cell.htm file, renamed cell1.htm which may have worked

better with the IE mobile browser

• DirectShow PTZ controls now work on the Blue Iris interface when running as a service

• Support for the StarDot NetCams

• Support for audio from the Panasonic BB-HCM511A, which transmits audio in 32kbps

G.726 format in RTSP packets.

• New SMTP email component which supports SSL/TLS (secure authentication) as

required by some SMTP servers such as gmail. The email test page now also sends the

image attachment if the camera is running. Email alerts now run in a separate thread so