Specifications

117

0: Pan left

1: Pan right

2: Tilt up

3: Tilt down

4: Center or home (if supported by camera)

5: Zoom in

6: Zoom out

8..10: Power mode, 50, 60, or outdoor

11..26: Brightness 0-15

27..33: Contrast 0-6

34..35: IR on, off

101..120: Go to preset position 1..20

updown: send a value of 1 to indicate that a complementary "stop" event will follow; send 0

otherwise and the camera will be moved for a preset duration

status

Get (and optionally set) the state of the traffic signal icon, active global profile as well as the

schedule's hold/run state:

signal: a single digit 0 for red, 1 for green, 2 for yellow.

profile: a single digit 0-7 for the profile number to set; or -1 to change the hold/run state. This

functions the same it does on the local UI, so sending a profile change a second time will set

the schedule to it's "hold" state.

dio: the state of a DIO output. An array of 0's and 1's is returned, or you may set a particular

value by sending an object with:

output: an output number 0-7

force: true or false