Specifications

113

flags: the following flags are defined:

1: the offset is in time (milliseconds)

2: the alert was triggered by the motion detector

4: the camera was in a no-signal state at the time of the alert

8: the alert was triggered by an audio event

16: the alert was triggered by an external source such as DIO, JSON command, or manual

trigger

date: file creation date, expressed as the integer number of seconds since January 1, 1970

color: 24-bit RGB value (red least significant) representing the camera's display color

camconfig

Get (and optionally set) the state of many camera properties:

reset:true reset the camera

enable:true or false enable or disable the camera

pause:n sends a pause command, and returns a value in seconds

-1: pause indefinitely

0: un-pause

1..3: add 30 seconds, 1 minute, 1 hour to the pause time

motion:true or false enable or disable the motion detector

schedule:true or false enable or disable the camera's custom schedule

ptzcycle:true or false enable or disable the preset-cycle feature

ptzevents:true or false enable or disable the PTZ event schedule

alerts:n sets the corresponding alert function

record:n sets the corresponding record function