Specifications

102

By default, every minute of every day will use profile 1 (green). Use the controls on this page

to assign the various profiles to different times of the day or week. If time is "cleared" this

indicates no active profile (an inactive state, represented by the ~ symbol in the toolbar).

When a camera is inactive, no recording, alerts, or image posting will occur. Otherwise, each

camera may define for itself what effect a particular profile will have. On the camera

properties Motion/triggers

(See 7.3) page, you may assign a different sensitivity, mask, or set a

flag that will force continuous recording. On the camera properties Alerts (See 7.5) page, you

may decide which alerts are sent while each profile is active.

You may use the Toolbar (See 4.) profile buttons 1-7 to manually force a particular profile to be

used by ALL cameras regardless of whether you have enabled the global or any specific camera

schedule. The ~ symbol will force all cameras to be inactive. Use the toolbar profile hold/run

button to return to normal schedule operation.

Weekdays

You may edit the schedule for an individual day by clicking its name. Hold the Control key to

select/unselect more than one day at a time. Use the Weekdays button to quickly select

weekdays, the weekend, or all days at once. When more than one day is selected, changes

made to profiles or time markers will be applied to all selected days. There are also Copy and

Paste buttons if you want to copy a particular day and then paste it to other selected days.