Safety data sheet

MSDS-No.: 43182
V001.15
Pritt Stick
Page 3 of 7
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove dry, forms a slippery coating with water.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Avoid skin and eye contact.
Ensure that workrooms are adequately ventilated.
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
7.2. Conditions for safe storage, including any incompatibilities
Store in sealed original container.
Store in a cool, dry place.
Avoid strictly temperatures below + 5 °C and above + 50 °C.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Glue stick
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Valid for
Germany
None
Biological Exposure Indices:
None
8.2. Exposure controls:
Respiratory protection:
Suitable breathing mask when there is inadequate ventilation.
Hand protection:
Recommended are gloves made from Nitril rubber ( Material thickness >0,1 mm, Perforation time < 30s).Gloves should be
replaced after each short time contact or contamination. Available at laboratory specialized trade or at pharmacies / chemist's
shops.
Eye protection:
Protective goggles
Skin protection:
Suitable protective clothing