Installation Guide
【Instruction for Remote Controller and Switch Pan
el
】
Control Panel / Remote Control Operation
(Control panel POWER switch must be ON to use remote control.)
The touch display panel is shown by LED's on the front bottom right of the appliance. The LED's will appear
on the bottom of the fireplace control panel.
POWER
Turns the appliance ON/OFF.
FLAME
Controls Flame change.
13 colors:
(F01-F02...F12-F13) Flame dims
from F01 to F13.
Cycle by cycle.
FLAME - Log
Controls Log Flame change.
13 colors
:(C01-C02...C12-C13) Flame dims
from C01 to C13.
Cycle by cycle.
.
HEATER
Controls the Heater.
Press button to initiate the
heater. (OFF) no heater or
blower.
(LO), heater blows warm air
(750W) (HI), heater blows
hot air (1500W)
NOTE: Heater functions cycle from OFF-LO-
HI