Installation Guide

7
WARNING: Do not move or remove the mesh trim panel, when the appliance is plugged in and
operating. This will cause the remote control and touch panel to no longer function.
(Control panel power switch must be ON to use remote control.)
The touch display panel is shown by LED's on the front bottom right of the appliance. The
LED's will appear on the bottom of the fireplace control panel.
POWER
Turns the appliance ON/OFF.
FLAME
Controls Flame change.
The flame will be cycled F1 – F2 – F3 – F4 – F5-
Flame Off.
F1 is the less flame,F5 is the biggest flame.
TOP LIGHT
Controls Log Flame change.
There are three colors for option.
Press the first time for orange color,
Press the second time for the blue color,
Press the third time for the purple color.
HEATER
Controls the Heater.
Press button to initiate the
heater. (OFF) no heater or
blower.
(LO), heater blows warm air
(750W) (HI), heater blows hot
air (1500W)
NOTE: Heater functions cycle from OFF-LO-HI
TIMER
Controls the Timer.
9 Settings: (1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h,9h) Press
button until reach desired setting.
LOG SPEAKER
The log speaker can make the real log burning
effect.
Press first time to turn on the log speaker,
Press second time to turn off the log speaker.