Installation Guide

10
⚫ Only use the appliance in accordance with the instructions in this manual! It cannot be used
for any other purpose.
⚫ Never operate the appliance when the appliance itself or the main cable show any signs of
damage. In order to avoid overheating, do not cover the heater.
⚫ Be responsible when handling the packing material. Warning: plastic wrapping may be lethal to
children. Do not place the appliance next to a socket.
⚫ Never operate the heater on a program switch, timer switch or any other appliance for automatic
operation.
⚫ The heater is only suitable for indoor use.
⚫ Never use the heater in the bathroom, shower or near a swimming
pool. The heater must not be located immediately below a socket-
outlet
⚫ If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
⚫ Never leave small children unattended near the
appliance. In case of malfunction, disconnect the plug
immediately.
⚫ When not in use for a considerable amount of time, unplug the
appliance. Components should only be serviced by an approved
electric technician.
To switch on：
Plug in the appliance into the socket. Turn on the Power Switch.
The control Switch Panel is on the bottom of fireplace (See pic).
Safety Instructions