User Manual User Manual - RevEAL Profile Junior – Prism Projection, Inc.
Product Specifications and Warnings Please read this manual prior to use. • • • • • • This product is intended for professional use only. This product is designed for damp conditions, but is not suitable for wet locations. Due to risk of injury the safety cable MUST be attached while the product is suspended. The product requires the appropriate power supply. (90-264 VAC, 47-63 Hz) It is not intended for use on dimming circuits.
Step 2: After attaching the appropriate connector to the power cord you can attach the power cord to the fixture. The power cord will go into the power-in port. Slide the connector into the port and twist the connector clockwise. Step 3: Now that the unit has power you need to provide data to the unit. This is done by plugging in an approved 5 pin DMX cable. The data-in port is found on the rear of the fixture.
User Interface All connections, settings and control options are located on the rear of the fixture, as illustrated below. The Navigation Buttons can be used to access control settings and display fixture status on the Navigation Screen. Intensity Control Knob DMX In/Out Firmware Update Port Navigation Screen Navigation Buttons Power On Off Switch (Connector) Power In/Out Ethernet Port User Manual - RevEAL Profile Junior – Prism Projection, Inc.
Home Screen The Home Screen displays the current fixture status including color temperature, intensity, DMX address, and number of DMX channels in use. The rotating fan symbol at the top right indicates the fan is working properly. Menu Screen The Menu Screen offers four options for control. Select Fixture Address, Channel Personality, Standalone Control, or TrueSource to advance to the desired control feature set.
Modes and DMX Channels Operating modes are set by using the button pad to navigate to the Personality and Fixture Address Menus. The menu allows the user to adjust; Color Mode, Color Temperature, Intensity (dimmer curve) and select Advanced Features such as power control. Remote power setting permits the user to control ECO and FULL power setting via DMX.
White (CCT) Available Options: Enabled, Disabled, Correction When enabled the White setting creates a Correlated Color Temperature (CCT)Channel. If the CCT channel is at any value other than 0, white colors will be produced by the instrument. At full the color generated will be 8000K white, at 11% the color generated will be ~3200K white. As the channel value is raised the color temperature will go up.
RevEAL Profile Junior DMX Chart Variable White Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> White (Full White, Variable White) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm Advanced Settings > Algorithm 1 2 Chan n n+1 Control Item CCT Intensity Default 0 0 Range 0, 255 0, 255 Function 2800K-5600K 0% - 100% 1 2 3 Chan n n+1 n+2 Control Item CCT CCT Intensity D
RevEAL Profile Junior DMX Chart Fixed White Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> White (Full White) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm 8 Bit 1 Chan n Control Item Intensity 7 Default 0 Range 0, 255 Function 0% - 100%
RevEAL Profile Junior DMX Chart Variable White + Correction Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> White (Variable CCT, CCT + Correction) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm 1 Chan n Control Item CCT Default 0 Range 0, 255 2 3 n+1 n+2 Correction Intensity 127 0 0, 255 0, 255 1 2 Chan n n+1 Control Item CCT CCT Default 0 0 Range 0, 255 0,
RevEAL Profile Junior DMX Chart Color + Variable White + Correction Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> Channel Personality> Color (X,Y) White (Variable CCT, CCT + Correction) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm 1 2 3 Chan n n+1 n+2 Control Item X Y CCT Default 0 0 0 Range 0, 255 0, 255 0, 255 4 5 n+3 n+4 Correction Intensity 127 0 0, 255 0
Prism Projection, Inc. 8228 East 124th Street South Sully, IA 50251 +1 (641) 594‐3356 info@prismprojection.com To receive an electronic copy of this user manual, please scan the QR code below.
