Specifications

1.15

Operation Manual

Revision 1.05Prism Sound Orpheus

· You may need to enter an administrator's name and password. Click 'OK':

· The installation process will then complete:

· When software installation is complete, close the box and connect the Orpheus unit to the FireWire

port of the Mac.

The Orpheus device's ports should now be visible in Audio/MIDI Setup as Core Audio ports.

NOTE: Do not connect the Orpheus unit to the FireWire port of the Mac until software

installation is complete.

· Remember to register your Orpheus at http://www.prismsound.com.

OS X 10.4 Tiger patch

To ensure correct operation of Orpheus, users of OS X 10.4 Tiger must install a 'patch' before

following the Orpheus installation procedure. The patch is provided by Apple, but is not part of the