Embarcadero 60 Installation Guide




Makesurethefoundationisflatandlevelpriortoplacement.Unitsusingliquidpropanewillcomewith
aburner,orifice,flexhoseandregulatorthatwillattachtothepropanetank.Thisgashosewillneedto
gofromthetanktotheburner.Thehoseshouldconnectfromthekeyvalvewithinthe unit,througha
ventunderneathandtothepropanetank.Makesureallfittingsaretightenedproperlywithawrench,
donothandtighten!Anadditionalflexhosewillbeattachedtotheotherendofthekeyvalveto the
flarefittingatthebottomoftheburner.Thearrowonthekeyvalveshouldbepointingthedirectionof
thegasflow(towardstheburnerplateonyourfirefeature).
Firefeaturesdonotincludepropanecylinder;youwillneedtoprovideone.Theliquidpropanesupply
cylindermustbeconstructedandmarkedinaccordancewiththespecificationsforpropanegas
cylindersasrequiredbytheU.S.DepartmentofTransportation(DOT).
3.2InternalViewofComponents
3.2.1NaturalGasUnit








3.2.2PropaneGasUnit 




