Rotondo 80 Installation Guide



Makesurethefoundationisflatandlevelpriortoplacement.Unitsusingpropanegaswillcomewitha

burner,orifice,flexhoseandregulatorthatwillattachtothepropanetank.Thisgashosewillneedtogo

fromthetanktotheburner.Thehoseshouldconnectfromthekeyvalvewithintheunit,throughavent

underneathandtothepropanetank.Makesureallfittingsaretightenedproperlywithawrench,donot

handtighten!Anadditionalflexhosewillbeattachedtotheotherendofthekeyvalvetotheflare

fittingatthebottomoftheburner.Thearrowonthekeyvalveshouldbepointingthedirectionofthe

gasflow(towardstheburnerplateonyourfirefeature).

Firefeaturesdonotincludepropanecylinder;youwillneedtoprovideone.Thepropanegassupply

cylindermustbeconstructedandmarkedinaccordancewiththespecificationsforpropanegas

cylindersasrequiredbytheU.S.DepartmentofTransportation(DOT).

3.2InternalViewofComponents

3.2.1NaturalGasUnit



3.2.2PropaneGasUnit

