Specifications

SECTION 4
MAINTENANCE
54
5. Reinstall the Service Station Printed Circuit Board, Wiper Motor Assembly, Printing Platen and
Capping Station, into the Tray; as described on the previous pages.
Suggestion for High Volume Users:
For printers that are being used at high volumes (over 200,000 pieces per month), we recommend
purchasing a second service station to reduce down-time for Service Station Maintenance. The new/clean
service station can be swapped with the dirty one. Then the dirty Service Station can be cleaned according
to the above instructions and made ready for the next time Service Station Maintenance is required.