User`s manual

Specifying A Power-Up Configuration
85
4. When the desired number displays, press the ↵ key to select it. The
following message displays briefly:
When processing is completed, the display shows:
NOTE: If the configuration number has been previously saved and Protect
Configs. = Enabled under CONFIG CONTROL, the following error
message displays:
If the above occurs, see “Modifying A Saved Configuration” on
page 86, step 4.
5. Print your configuration and store it in a safe place for future reference.
Refer to “Printing A Configuration” on page 87.
Specifying A Power-Up Configuration
You can specify any one of the nine configurations (1-8 or Factory) as the
power-up configuration:
1. Press the key until the following message displays:
2. Press the ↓ key until the following message displays:
3. Press the
+ or − key to cycle through the options (1-8 and Factory). When
the desired number displays, press the ↵ key to select it. The following
message displays:
Saving
Configuration
Save Config.
X *
CONFIG. EXISTS
Delete First
.
.
.
MENU MODE
CONFIG. CONTROL
Power-Up Config.
1*
Power-Up Config.
X *