User`s manual

373
TEC B-470/870 Series T5000e with PPI2 Emulation
N/A IGP/PPI2 SETUP Menu,
Speed CMDs - (Process*, Ignore)
Process - Print speed in the XS command & slew speed
in the T command will be used and override the Media
Control menu settings.
Ignore - Print speed in the XS command & slew speed in
the T command will have no effect. The Media Control
menu settings will be used instead.
N/A IGP/PPI2 SETUP Menu,
AY Intensity CMD - (Process*, Ignore)
Process - Print Intensity via the AY command is used &
overrides the Quick Setup menu value.
Ignore - Print Intensity via the AY command is ignored.
Quick Setup menu value used instead.
N/A IGP/PPI2 SETUP Menu,
U1/U2 Move CMDs - (Process*, Ignore)
Process - U1 move media forward & U2 move media
backward cmds are used & override the Quick Setup
menu Ver Image Shift value.
Ignore - U1 and U2 commands are ignored and Quick
Setup menu Ver Image Shift value is used.
N/A IGP/PPI2 SETUP Menu,
XS Media ‘D’ Act - (Tear-Off*, Peel-Off, Ignore,
Continuous, Tear-Off Strip)
Uses the XS media ‘D’ command to select any of the
Media Handling modes listed above
Ignore - The printer only uses the Media Handing mode
selected in the Quick Setup menu.
N/A IGP/PPI2 SETUP Menu,
AR Pre-feed CMD - (Process*, Ignore)
Process - Printer uses the media pre-feed AR command.
Ignore - Printer ignores the pre-feed AR command.
Media is not pre-fed.
N/A IGP/PPI2 SETUP Menu,
AX Fine Adj. CMD - (Process*, Ignore)
Process - Position fine adjust AX command is acted on if
received.
Ignore - Position fine adjust AX cmd is ignored if
received. Media will not be fine adjusted.
Table 33: PPI2 Menu (continued)