User`s manual

288
Chapter 3 BATTERY CONTROL
Time To Go Alert
This allows you to set the minimum Time to Go value for determining when a
“RECHARGE BATTERY” warning occurs. When the printer receives a status
from the battery that is less than the value of the Time To Go menu, the
“RECHARGE BATTERY” warning displays on the LCD.
The range is .3 - 12.0, and the factory default is 1.0 Hours.
NOTE: This menu is available only when you select “Enable” in the Battery
Monitor submenu.
High Volt Alert
This allows you to set the maximum voltage for determining when a “BATT
HIGH VOLT” warning occurs. When the printer receives a status from the
battery that is greater than the value of the High Volt menu, the “BATT HIGH
VOLT” warning displays on the LCD.
The range is 12.5 - 16.0 Volts, and the factory default is 16.0 Volts.
NOTE: This menu is available only when you select “Enable” in the Battery
Monitor submenu.
Low Volt Alert
This allows you to set the minimum voltage for determining when a “BATT
LOW VOLT” warning displays on the LCD. When the printer receives a status
from the battery that is less than the value of the Low Volt menu, the “BATT
LOW VOLT” warning displays on the LCD.
The range is 8.5 - 11.5 Volts, and the factory default is 8.5 Volts.
NOTE: This menu is available only when you select “Enable” in the Battery
Monitor submenu.