User`s manual

ETHERNET ADDRESS Submenus
269
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options are Disable (the factory default) and Enable.
ETHERNET PARAMS
Nest Serv Type
NetBIOS Protocol
Enable* Disable
Novell Frame
Auto* Bindery
Novell Protocol
Enable* Disable
NDS
Ethernet 802.3 Ethernet 802.2Auto Sensing* Ethernet II 802.2 Snap
Notes:
* = Factory Default
1
Appears only if an Ethernet Network Interface Card (NIC) is installed.
2
Set the port number that works with your host system.
3
Appears only if the IPDS emulation is installed.
ETHERNET
PARAMS
(1)
ASCII Data Port
9100* 0-65535
(2)
Keep Alive Timer
3 Minutes* 2-10 Minutes
Ethernet Speed
IPDS Data Port
(3)
5001* 0-65535
(2)
10 Full Duplex 100 Half DuplexAuto Select* 10 Half Duplex 100 Full Duplex
Job Control
Standard* Enhanced Off