User`s manual

230
Chapter 3 Emulation Submenus
Page Rotation
(From page 166.) This option rotates the physical IPDS page.
The options are 0, 90, 180, and 270.
The factory default is 0.
PGL Normal
(From page 176.) This option determines whether PGL passes the text data in
Normal mode according to LP+ or whether PGL will print the text data itself.
• LP+ Menu. PGL will pass the text data to LP+ only in the default setting
state (6 LPI, default character set, and font attribute).
• PGL Menu. PGL will always print the text data itself.
The factory default is LP+ Menu.
PI Slew Range
(From page 175.) You can specify how many lines the paper will feed.
• 15. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will move
1 line.
• 16. A paper slew of 0-15 will move 1-16 lines.
The factory default is 16.
Position Aft FF
(From page 158, page 170.) Allows you to select the location of the print
position after a Form Feed command is sent.
• Off. Sets the printer to print at position 2 of the first print line on the next
form.
• On. Sets the printer to print at print position 1 of the first print line on the
next form.
The factory default is Off.
Power on IGP/PGL
(From page 176.) You can set the IGP/PGL feature so that it is enabled or
disabled when the printer is powered on.
• Enable. The IGP/PGL is enabled when the printer is powered on. (The
IGP/PGL feature is initialized in the Normal mode.)
• Disable. The IGP/PGL is disabled when the printer is powered on. (The
IGP/PGL feature is initialized to the Quiet mode.)
The factory default is Enable.